Compressed air filters
When the air is compressed by the compressor, the amount of solid contaminants, such as dust, increases rapidly. and the so-called condensate, ie a mixture of water and oil. Sometimes there are also gaseous pollutants. It depends largely on the environment in which the compressor works and weather conditions. The humidity of the air sucked in by the compressor has a direct impact on the amount of condensate, which is very chemical aggressive and has an extremely negative impact on the pneumatic installations, air receivers and the compressor tank itself.
In order to prevent damage and ensure proper operation of pneumatic systems and tools, it is necessary to free the compressed air from contamination by using appropriate filters depending on the needs and requirements of air quality. It is thanks to filtration that the durability and service life of pneumatic elements is significantly increased, and in some industries, such as painting, working without compressed air filters is simply not possible.
Basically, compressed air (network) filters can be divided according to the level of filtration into the following classes:
- pre-filters removing impurities at the level of 5 μm. (III cleanliness class according to the ISO 8573-1 standard)
- compressed air filters fine filtration min. 1 μm for solid particles and less than 0.1 mg / m3 for oil particles. (II cleanliness class according to ISO 8573-1)
- final filters (highest accuracy) filtration min. 0.1 μm for solid particles and 0.01 mg / m3 for oil contamination. (I cleanliness class according to ISO 8573-1 standard)
- carbon filters with a filtration level of oil impurities at the level of 0.008 mg / m3 (cleanliness class I according to ISO 8573-1). Compressed air filters may have a manual or automatic condensate drain, depending on the model or brand.
Some models may be equipped with a cartridge throttling indicator. In addition, where the pressure in the installation exceeds 16 bar, you can use high-pressure filters, which we also offer.
In addition to filters, our offer includes cyclone separators, which are used for the initial condensation of condensate particles by introducing compressed air into a swirling motion and then removing it from the installation. When selecting compressed air filters, the capacity should also be taken into account (apart from the degree of filtration), most often given by the manufacturer in liters per minute or cubic meters per hour.
Our basic offer includes well-known and respected manufacturers of compressed air filters, including: SKP, Atlas Copco, ATS, Parker.
SKP compressor filters
Korean manufacturer of high-quality air treatment elements, including compressed air filters.
SAF series pre-filters
- connection from G 1/4 "to G 1"
- 10 μm filtration level
- capacity from 1000 l / min. up to 13,000 l / min.
- max working pressure 10 bar
SAFL series fine filters
- connection from G 1/4 "to G 2"
- 3 μm filtration level
- flow from 700 l / min. up to 12,000 l / min.
- max working pressure 10 bar
- automatic condensate drain
SAM series fine filters
- connection from G 1/4 "to G 2"
- 0.3 μm filtration level
- flow from 750 l / min. up to 12,000 l / min.
- max working pressure 10 bar
- automatic condensate drain
Fine filters (final) SAMD series
- connection from G 1/4 "to G 2"
- filtration level 0.01 μm
- flow from 500 l / min. up to 14,000 l / min.
- max working pressure 10 bar
- automatic condensate drain
Activated carbon filters SAMH series
- connection from G 1/2 "to G 1"
- filtration level 0.01 μm
- flow from 1100 l / min. up to 5000 l / min.
- max working pressure 10 bar
- automatic condensate drain
SAMG series water separators
- connection from G 1/2 "to G 1 1/2"
- 99% water separation
- flow from 1500 l / min. up to 6000 l / min.
- max working pressure 10 bar
- automatic condensate drain
Atlas Copco filters
Based on many years of experience in the field of air compression and as a result of continuous research and testing, Atlas Copco has developed a complete range of the most renowned DD, DDp, PD, PDp and QD filters in accordance with the latest international standards .
DD oil coalescing filter
- connection from G 3/8 "to G 3"
- 1 μm filtration level
- flow from 600 l / min. up to 33,000 l / min.
- max pressure 16 bar
- automatic condensate drain
- cartridge throttling indicator
Dust filter DDp for dry air
- connection from G 3/8 "to G 3"
- 1 μm filtration level
- flow from 600 l / min. up to 33,000 l / min.
- max pressure 16 bar
- automatic condensate drain
- cartridge throttling indicator
PD oil coalescing filter
- connection from G 3/8 "to G 3"
- filtration level 0.01 μm
- flow from 600 l / min. up to 33,000 l / min.
- max pressure 16 bar
- automatic condensate drain
- cartridge throttling indicator
PDp dust filter for dry air
- connection from G 3/8 "to G 3"
- filtration level 0.01 μm
- flow from 600 l / min. up to 33,000 l / min.
- max pressure 16 bar
- automatic condensate drain
- cartridge throttling indicator
QD filter activated carbon (to remove oil vapors)
- connection from G 3/8 "to G 3"
- filtration level 0.003 μm
- flow from 600 l / min. up to 33,000 l / min.
- max pressure 16 bar
Air filters for the ATS compressor
Italian producer of high-quality compressed air filters. Filters can be equipped with an automatic condensate drain and a manometric differential indicator of the cartridge throttling (option).
- connection from G 1/2 "to G 3"
- flow from 570 l / min. up to 46 750 l / min.
- max pressure 16 bar
filtration level:
- P class 3 according to ISO 8573-1 3 μm
- M class 2 according to ISO 8573-1 1 μm
- H class 1 acc. This is ISO 8573-1 0.01 μm
- C class 1 acc. To ISO 8573-1 carbon filter (adsorption), oil content after filtration 0.003 mg / m3
Parker compressed air filters
A well-known and appreciated global American concern that produces, among other things, pneumatic components, including high-quality compressed air filters.
Compact series
- connection from G 1/4 "to G 1/2"
- flow from 720 l / min to 2340 l / min.
- 5 μm filtration level
- max pressure 10 bar